The mini brushless fan uses advanced technology and high-quality materials to ensure excellent performance and reliability. Independent production: We have our own molds and injection molding machines, ensuring the production quality and supply stability of our products.

 

 

Size: The size of the mini brushless fan is 15x15x04mm, which is exquisite and compact, suitable for various application scenarios.

Fan: up to 20,000RPM, providing strong wind power and efficient fan to keep the equipment running stably.

Weight: The fan only weighs 1.3g, is easy to carry, does not take up too much space, and is easy to install and use.

 

 

1. Imported IC, universal voltage range: Mini Brushless Fan is designed with imported IC, with a wide voltage range, universal 1.8~6V, and can be applied to various power supply environments.

 

 

2. Special motor structure: The fan has a special motor structure design with small current and thin volume, which provides excellent wind output while ensuring efficient and energy-saving operation.

 

 

3. High-quality materials, high strength: The outer frame and fan blades are made of LCP material, which has high strength and durability and can work stably in various environments.

 

 

4. Precision axis and high-precision bearings: The fan's axis is only 0.06mm, and the bearings are made of steel with high precision, ensuring the stability and durability of the fan's operation.

 

 

5. Impeller balance design: The fan impeller balance execution standard is less than 0.05mg, 100% corrected balance, ensuring smooth operation of the fan and reducing noise.

 

 

 

Mini Brushless Fan is suitable for dental 3D scanners, masks, AR glasses, high-brightness micro projectors and other fields. It has the characteristics of low noise, low power consumption, long life, and exquisite and lightweight design, making it an ideal choice for various devices. The front uses silver-gray elements, which has a high-end feel and mirror effect, adding a sense of fashion and technology to the product.

 

 

1. The production staff introduces the raw LCP material into the baking material machine and bakes it at a temperature of 140°~150°.

2. Pour the baked raw material into the hopper of the injection molding machine and begin injecting the frame blades.

3. The technical personnel have adjusted the semi-automatic winding machine, and the operators begin winding the coils.

4. The operators place the semi-finished adhesive wire package under the lens of the spot welding machine and begin welding the wires.

5. After applying UV glue, the operators place the fan with the front side up on the conveyor belt of the UV curing machine for curing under ultraviolet light.

6. Balance the fan blades for calibration.

7. Align the fan blade axis with the center of the oil shaft and insert it into the frame.

8. Connect the fan to the power supply and conduct a powered test.

9. After labeling, proceed with the packaging using blade card packaging. Place 5 units in each small compartment, with a total of 440 units per layer and 4 layers per box, allowing for a full box to contain 2640 units.

 

http://www.dcblower.com/