Features and Benefits
●High capacity membrane provides excellent retention and flow rates and low protein binding
●Good core and cage which material from Korea make that dissolved matter is ultra low;
●No adhesives, binders, or surfactants are used in the manufacturing process reduce extractables ;
●Production in one hundred grade clean room and washed by purity water assure the purity and reduce extractables and downtime.
●100% filter cartridges were integrity tested assure the safe of filtration.
Specification
Filtration Media | Hydrophilic PVDF membrane |
|
Media Support |
PP non-woven |
|
Cage |
PP/Reinforced PP |
|
Core |
PP/Reinforced PP/Stainless steel |
|
Out Diameter |
Φ68mm Φ69mm |
|
Inner Diameter |
Φ32mm |
|
Length |
2.5~40" |
|
O-Ring |
Silicone, EPDM , Nitrile , Fluorous , Fluorous and PTFE |
|
Retention rating |
0.20, 0.45, 1.00 µm |
|
Effective Filtering |
Dimension≥0.65m² |
|
PH value |
1~13 |
|
Normal operating temperature |
≤65℃ |
|
Max. operating temperature |
90℃,pressure differential ≤0.10Mpa |
|
Max. differential pressure |
25℃,forward direction 0.42Mpa,reverse direction 0.21MPa |
|
Esotoxin |
﹤0.25EU/ml |
|
Extractive |
<0.03g (10"filter cartridge) |
|
Sanitization/Sterilization |
121±2℃ steam for 30min/ once or sterilization cabinet 30min/once |
Flow Rate
10" Element with water at 68 °F (20 °C) (Standard Values)
Hydrophobic PVDF with air |
Hydrophilic PVDF with pure water |
Integrity Test Specifications
Min. Bubble Point (10-inch cartridge, 60% isopropyl alcohol wetted membrane,25℃)
Pore Size | 0.20µm |
0.45µm |
0.8µm |
1.0µm |
Hydrophilic PVDF Min. Bubble Point |
≥0.06Mpa |
≥0.035Mpa |
≥0.025Mpa |
≥0.020Mpa |
Hydrophobic Min. Bubble Point |
≥0.07Mpa |
≥0.04Mpa |
≥0.02Mpa |
Typical Applications
◇ Beer ◇ Dairy ◇ Bottled Water ◇ Soft drinks ◇ Wine ◇ Spirits
Order Information
FPF | 01 | L02 | S1 | S |
|||||||
Micron ratings | Length | End Caps |
O-ring/Gasket | ||||||||
Code |
μm | Code | Inches | Code | Types |
Code | Material | ||||
02 | 0.20 | L02 |
2.5 | S1 | DOE | S | Silicone | ||||
04 | 0.45 | L05 | 5 | S2 | 222 O-ring/Flat | B | Buna-N | ||||
10 | 1.00 | L10 |
10 | S3 | 222 O-ring/Fin | E | EPDM | ||||
30 | 3.00 | L20 | 20 | S4 | 226 O-ring/Flat | V | Viton | ||||
50 |